Medios de envío
Nuestro local
-
FACTION CORE SHOP Av Gaona 2461 Plaza Irlanda, Buenos Aires. Horario: Lunes a Viernes de 15:00 a 20:00, Sabados de 10:00 a 13:00 y de 16:00 a 20:00. Debido a restricciones a causa del COVID-19, sugerimos comunicarse telefonicamente o por whatsapp antes de pasar por el local ya que los Horarios podrian cambiar repentinamente y no reflejarse en este horario automaticamente. Gracias! Tel. 11-3966-5285Gratis
Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset. Here are a few features that make these forks so strong.
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
Post weld 4Q Baked heat-treatment
SPECS >
Legs: Seamless Swaged (No Welded Cap)
Dropouts: Investment Cast
Steerer Tube: 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length: 166mm
Compression: M24 X 1.5 Thread – 6mm Allen Slot
Axle to Crown: 320mm
Offset: 25mm
Weight: 2.25 lb (1.02 kg)
Heat Treat: 4Q Baked Post-Weld
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
Post weld 4Q Baked heat-treatment
SPECS >
Legs: Seamless Swaged (No Welded Cap)
Dropouts: Investment Cast
Steerer Tube: 1 Piece CNC-Machined 4130 CrMo
Steerer Tube Length: 166mm
Compression: M24 X 1.5 Thread – 6mm Allen Slot
Axle to Crown: 320mm
Offset: 25mm
Weight: 2.25 lb (1.02 kg)
Heat Treat: 4Q Baked Post-Weld